void setup() {
Serial.begin(9600);
Serial.println("Hello World!");
}
void loop() {
}
보드로 업로드하는데, 다음과 같은 에러 메시지가 뜹니다.
분명 어제는 되었는데, 오늘은 안되네요 ㅜㅜ;
해결방법을 안내해 주시면 감사하겠습니다.
아두이노:1.8.16 (Windows Store 1.8.51.0) (Windows 10), 보드:"Arduino Uno"
스케치는 프로그램 저장 공간 1486 바이트(4%)를 사용. 최대 32256 바이트.
전역 변수는 동적 메모리 200바이트(9%)를 사용, 1848바이트의 지역변수가 남음. 최대는 2048 바이트.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xfd
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfd
Problem uploading to board. See https://support.arduino.cc/hc/en-us/sections/360003198300 for suggestions.
이 리포트는 파일 -> 환경설정에 "컴파일중 자세한 출력보이기"를
활성화하여 더 많은 정보를
보이게 할 수 있습니다.
댓글목록
작성자 아두
작성일 2021-12-14
평점
포트 설정을 정확히 했는지 확인해보시구요
아마 우노 보드의 포트가 아닌 다른 포트에 연결했을 가능성이 가장 큽니다!
포트 변경, usb 케이블 변경,드라이버 재설치, IDE 재설치 및 최선 버전으로 업데이트 등의 조치를 해보세요
그 외에도 안된다면 안타깝지만.. 하드웨어적으로 맛이 갔을 확률이 있습니다
보드를 취급하는 도중에 과전류나 과전압 등의 사유로 인해 보드가 대미지를 입었을 수 있습니다
보드 동작 환경을 한 번 점검 해보셔야 하지 않을까 싶습니다
작성자 ㄱㅈㅎ
작성일 2021-12-16
평점